RZ/T2M - PTP Stack and example application availability
Hi,We are trying to evaluate the RZ/T2M platform for TSN capabilities.To evaluate PTP, is there a stack and example application available which can demonstrate time sync?
View ArticleVK-RZG2LC board with 4GB DDR4
Hello, We want to use G2LC on a custom module VK-RZG2LC with 2Gx16 Micron memory.It looks that the xls file comes with option for 2 chips 2GBx16 each, however in our design we want to use single chip...
View ArticleRZV2L: Implementation of CANFD through FSP
Hi, I have added g_canfd0 CANFD Driver in stacks. I need to initialize CANFD in hal_entry.c file.Kindly provide some reference for RZV2L.#include "hal_data.h"...
View ArticleDocker is not working
Hii MicBis,I am bulid yocto linux using BSP-3.0.5 and 3.0.4 both But docker is getting segmentation fault.but in prebuild image it working.Hii iam facing issue in doker in RZFIVE I am using...
View ArticleClik here to view.
CAN Bus RZG2L-SMARC
I'm trying to test CAN bus by connecting rx and tx of both can 0 and can1, but i facing with the bellow issue,how to fix this issue
View Articlesupport for mipi dsi display in RZ/G2L chip
Hi Team i am using a custom board which i need to connect to a mipi display. I tried using waveshare mipi dsi display which uses an icn6211 bridge which is not supported by kernel version 5.10 can...
View ArticleClik here to view.
RZ/T2M MTU3 interrupt/callback configuration
Hi everybody,I am new to Renesas world and I need some help.I am using the Evaluation board RSK for RZ/T2M.I am trying to develop a motor control application and I need an interrupt every PWM period. I...
View ArticleClik here to view.
RZV2L: Blinky Application debug through uboot
HI,I run rpmsg demo application successfully.I want to run blinky application without Jlink Debugger. So I tried same what I did for CM33 Sample Program Invocation with u-boot.BUt voltages are not...
View ArticleVSC 8531 Driver issue in RZ/N1D
Hi team,We are trying to use the VSC 8531 RGMII PHY with RZ/N1D processor, but in the u-boot we are unable to detect the ethernet. We tried adding VSC PHY driver patch as well but still ethernet is not...
View ArticleHow to disable and enable the processor interrupts in RZN1D?
How to disable and enable the processor interrupts in RZN1D?
View ArticleCompiler configuration on RZN1D
Hi,How to see which compiler (GNUC/ CC_ARM / ICCARM) is selected/enabled for the project which are running on IAR v8.30 (platform RZN1D)?Also, How to change the compiler?Regards,Mayur
View ArticleClik here to view.
GUI tool
Dear,It seems that you provide the TES Guiliani GUI development tool for RZ/A series.https://www.renesas.com/us/en/software-tool/tes-guiliani1. Could you let me get the user guide and the example code...
View ArticleIntegration of SWupdate in VLP 3.0.3
Hi Team,As My project demand to Have OTA fw update. I choose SWupdate as my software update agent.Processor I am using: RZG2NPackage I have used: RZ/G Verified Linux Package...
View ArticleClik here to view.
RZ/N2LThe flash loader program reported an error
Have you encountered the same issue when using RZN2L? This problem has been troubling me for several days.I have also tried using the motor kit's routines in...
View ArticleClik here to view.
unable to load U-boot on RZ/N1D custom board
Hi,We have designed the custom hardware based on RZN1D chip. As per the docs from startup guide we have to load the U-boot into hardware from DFU USB and NAND Currently we have tried to load from...
View ArticleClik here to view.
How to add live watch to global variables in IAR for RZN2L OR RZT2?
Environment: IAR Embedded Workbench for ARM 9.40Kit： RZN2L-Motor-Solution-KitExample：RZT2M_RSK_usb_pcdc_Rev120Debugger ：Ijet I'm trying to view global variables online, but I can't find the 'Add Live...
View ArticleTimers
RZ/T1 evaluation kit Arm® Cortex®-R4Part No: RTK7910018C00000BEHi Hope everyone is doing fine. I am using RZ/T1 evaluation kit. Compiler i am using is e2 studio. Facing issue in timer configurations. I...
View ArticleTimers
Timer Pulse UnitPART NO: RZ/T1I am using 2 timers pulse units TPU0 and TPU9. TPU0 for generating interrupt after every 10ms. I am toggling the LED after every 10ms to check whether code is working fine...
View Articleunable to initialize the USB as Host on RZN1D custom board
Hi,We have developed a custom hardware based on RZN1D chip. When we are trying to initialize the USB as HOST. The program is getting stuck inside of "r_usb_hstd_HciWaitTime" function.After debugging we...
View Article
![[-100%] Commodity Intelligence – (Android Apps)](http://play-lh.googleusercontent.com/j67-qJvmnn4xnVlYVZ9ZhtZUJIgwjKekJGoKQT6D1KHcWGZxtQaFroummEvwV17na7tyh1pGbbeWCRdWtTKqeg=w950-h950)
