Dear Renesas Team,
Hi,
we were facing issue with porting OR integrating two project with FreeRTOS , Currently we have used state flow and the code is running as expected , But when we try to add other peripheral example code separately we are not able to get the output.
Requesting you to kindly look into the issue and provide us solution on the same.
Below modules we have tested independently sample codes available on website. It is working fine. - Issue is with integration of the modules.
Our Requirement on Peripheral:
I2C-2 Numbers
SPI-2 Numbers
PWM-8 Numbers
ADC-8 Numbers
Internal RTC- 1 Number
GPIO Interrupt -4 Numbers
MTU timer-3 Number
SDIO- 1 Number
OSTM Timer -3Number
UART -2 Number
USB- 1Number
Ethernet - 1Number
Regard's