stream it kit v2 not working as per the demo code but the flashing seems to be success

D:\Stream_video>..\utils\program_qspi.bat program_qspi_loader_peoke.command
LOAD BOOT LOADER INTO Single QSPI FLASH
===================================================================
***    Remember to update the JLink.exe path specified          ***
***    in this batch file if using a different version than     ***
***    that installed by the RSK+RZA1H_V2 installer.            ***
***    This batch file was tested and works with Ver 6.12f      ***
***    of the JLink.exe                                         ***
***                                                             ***
***    Please refer to the RSK+RZA1H Tutorial Manual            ***
***    for more information on generating the binary files.     ***
===================================================================
------------------------------------------------------------------------
ERROR: The system was unable to find the specified registry key or value.
Please Install J-link onto your host PC, using default version from IMAGE
SEGGER J-Link Commander V6.44e (Compiled Apr  5 2019 16:17:35)
DLL version V6.44e, compiled Apr  5 2019 16:15:03

J-Link Command File read successfully.
Processing script file...

J-Link connection not established yet but required for command.
Connecting to J-Link via USB...O.K.
Firmware: J-Link Lite V9 compiled Jan  7 2019 14:02:43
Hardware version: V9.00
S/N: 229002015
License(s): GDB
VTref=3.322V
Target connection not established yet but required for command.
Device "R7S721031" selected.

Connecting to target via JTAG
TotalIRLen = 4, IRPrint = 0x01
JTAG chain detection found 1 devices:
 #0 Id: 0x4BA00477, IRLen: 04, CoreSight JTAG-DP
Scanning AP map to find all available APs
AP[3]: Stopped AP scan as end of AP map has been reached
AP[0]: AHB-AP (IDR: 0x44770001)
AP[1]: APB-AP (IDR: 0x24770002)
AP[2]: JTAG-AP (IDR: 0x14760010)
Iterating through AP map to find APB-AP to use
AP[0]: Skipped. Not an APB-AP
AP[1]: APB-AP found
ROMTbl[0][0]: CompAddr: 80002000 CID: B105900D, PID:04-003BB906 CTI
ROMTbl[0][1]: CompAddr: 80008000 CID: B105900D, PID:04-003BB906 CTI
ROMTbl[0][2]: CompAddr: 8000C000 CID: B105900D, PID:04-003BB906 CTI
ROMTbl[0][3]: CompAddr: 8000F000 CID: B105F00D, PID:04-000A3FA9 ???
ROMTbl[0][4]: CompAddr: 80020000 CID: B105100D, PID:04-000BB4A9 ROM Table
ROMTbl[1][0]: CompAddr: 80021000 CID: B105900D, PID:04-001BB961 TMC
ROMTbl[1][1]: CompAddr: 80022000 CID: B105900D, PID:04-003BB906 CTI
ROMTbl[1][2]: CompAddr: 80023000 CID: B105900D, PID:04-004BB912 TPIU
ROMTbl[1][3]: CompAddr: 80024000 CID: B105900D, PID:04-001BB908 CSTF
ROMTbl[1][4]: CompAddr: 80030000 CID: B105900D, PID:04-000BBC09 Cortex-A9
Found Cortex-A9 r3p0
6 code breakpoints, 4 data breakpoints
Debug architecture ARMv7.0
Data endian: little
Main ID register: 0x413FC090
I-Cache L1: 32 KB, 256 Sets, 32 Bytes/Line, 4-Way
D-Cache L1: 32 KB, 256 Sets, 32 Bytes/Line, 4-Way
System control register:
  Instruction endian: little
  Level-1 instruction cache disabled
  Level-1 data cache disabled
  MMU disabled
  Branch prediction disabled
Memory zones:
  [0]: Default (Default access mode)
  [1]: AHB-AP (AP0) (DMA like acc. in AP0 addr. space)
  [2]: APB-AP (AP1) (DMA like acc. in AP1 addr. space)
Cortex-A9 identified.
Reset delay: 0 ms
Reset type NORMAL: Toggle reset pin and halt CPU core.

PC: (R15) = 18000000, CPSR = 600001D3 (SVC mode, ARM FIQ dis. IRQ dis.)
Current:
     R0 =18000000, R1 =00000000, R2 =000000D3, R3 =00000005
     R4 =20021004, R5 =FCFE1800, R6 =00000000, R7 =00000000
     R8 =18000008, R9 =18000008, R10=00000000, R11=00000000, R12=00000000
     R13=00000000, R14=00000000, SPSR=00000000
USR: R8 =00000000, R9 =00000000, R10=00000000, R11=00000000, R12=00000000
     R13=20020FE8, R14=FFFF3BD0
FIQ: R8 =00000000, R9 =00000000, R10=00000000, R11=00000000, R12=00000000
     R13=00000000, R14=00000000, SPSR=01000000
IRQ: R13=00000000, R14=00000000, SPSR=00000402
SVC: R13=00000000, R14=00000000, SPSR=00000021
ABT: R13=00000000, R14=00000000, SPSR=600001FF
UND: R13=00000000, R14=00000000, SPSR=600001DB

Device "R7S721031" selected.

 

Writing FF41 -> FCFE341C

Writing 0000 -> FCFE3A1C

Writing 0000 -> FCFE361C

Writing 0000 -> FCFE351C

Writing FF41 -> FCFE721C

Downloading file [..\Renesas\StreamIt2_QSPI_Loader_Release.bin]...
J-Link: Flash download: Bank 0 @ 0x18000000: 1 range affected (65536 bytes)
J-Link: Flash download: Total time needed: 0.329s (Prepare: 0.037s, Compare: 0.000s, Erase: 0.158s, Program: 0.127s, Verify: 0.000s, Restore: 0.006s)
O.K.

Reset delay: 0 ms
Reset type NORMAL: Toggle reset pin and halt CPU core.

PC: (R15) = 18000000, CPSR = 600001D3 (SVC mode, ARM FIQ dis. IRQ dis.)
Current:
     R0 =18000000, R1 =00000000, R2 =000000D3, R3 =00000005
     R4 =20021004, R5 =FCFE1800, R6 =00000000, R7 =00000000
     R8 =18000008, R9 =18000008, R10=00000000, R11=00000000, R12=00000000
     R13=00000000, R14=00000000, SPSR=00000000
USR: R8 =00000000, R9 =00000000, R10=00000000, R11=00000000, R12=00000000
     R13=20020FE8, R14=FFFF3BD0
FIQ: R8 =00000000, R9 =00000000, R10=00000000, R11=00000000, R12=00000000
     R13=00000000, R14=00000000, SPSR=01000000
IRQ: R13=00000000, R14=00000000, SPSR=00000402
SVC: R13=00000000, R14=00000000, SPSR=00000021
ABT: R13=00000000, R14=00000000, SPSR=600001FF
UND: R13=00000000, R14=00000000, SPSR=600001DB

Device "R7S721031_DUALSPI" selected.

 

Writing FF41 -> FCFE341C

Writing 0000 -> FCFE3A1C

Writing 0000 -> FCFE361C

Writing 0000 -> FCFE351C

Writing FF41 -> FCFE721C

Downloading file [VideoOverIP_PEKOE_OV7670.bin]...
J-Link: Flash download: Bank 0 @ 0x18000000: 1 range affected (2621440 bytes)
J-Link: Flash download: Total time needed: 32.962s (Prepare: 0.084s, Compare: 0.000s, Erase: 5.812s, Program: 26.934s, Verify: 0.000s, Restore: 0.131s)
O.K.

Reset delay: 0 ms
Reset type NORMAL: Toggle reset pin and halt CPU core.

 

Script processing completed.

------------------------------------------------------------------------
That's it.