How to enable qemu in Rz/A1H 4.9 BSP
I am using linux 4.9 BSP for development. I want to enable qemu for running freeDOS on the A1h.I enabled qemu using menuconfig option but while building getting following error.Your Buildroot...
View ArticleRZA1L VDC5 BT601 input external VSYNC HSYNC problem
Hi,I want to capture BT601 625 i signal with RZA1L from VDC5 input, I have my own PCB I have modifed SDK for camera application for capturing from VDC5 input.I have achieved to capture video but I...
View ArticleRSK - DisplayIt USBH Sample cannot read the USB device
Hi,I am new to using RSK board and figuring out how to use various peripherals by running the sample programs available with the RSK RZA1H (DisplayIt) board.USBH Sample 1 program does not read the 2GB...
View ArticleHow to enable two HDMI display in Salvator-xs board
Hi All, I am trying to enable two HDMI display in Salvator board. If anyone tried for this, please provide the steps. ThanksKamal
View ArticleGPRS Function in RZG1E
Dear Sir/madam,I would like to know if there is GPRS available with RZG1E, if so, then what drivers/procrdures needed for it to connect to the network. Thank you!
View ArticleRZA1 VDC5 rotate problem
Hi,I have RZA1L and I have achieved to capture 704x544 BT656 interlaced image from input and recorded YCbCr422 format and also displayed.Now I want to rotate it 90 degree I also Achieved to rotate but...
View ArticleRZ G1M starter kit and BD101LCC2 display
Hi, I'm using RZ G1M starter kit and as per elinux.org website, the suggested display is Boundary devices BD101LCC1. However this display is obsolete and its upgraded to BD101LCC2 by Boundary devices....
View ArticleRunning the GTK application automatically after boot process.
Hi i am using the Yocto Linux 2.0 Linux distribution given in https://elinux.org/RZ-G/Boards/Yocto_2.0. I tried to run the gtk3-demo application present in the /usr/bin/ folder, I am able to run it...
View ArticleRZ family
I wish to use RZ1 solution kit and threadx. Is there an example of how to use SD card as storage medium using the sdio interface ? many thanks.
View ArticleProblem when using SGTL5000 for audio in RZ/G1C
Hi everyone, I am using SGTL5000 for audio in RZ/G1C. The playback is working flawlessly, but I when I try to capture sound it gives out "rcar_sound ec500000.rcar_sound: status check failed". I am new...
View ArticleA1H Enabling Qt
Currently i am trying to enable qt for the A1H using rza_linux-4.9_bsp. But how can i enable the eglfs backed. Please suggest how can i enable OpenGL and EGL for activating the eglfs.
View ArticleClik here to view.
iWave's RZ/G1C Single Board Computer to rank TOP 10 Single Board computers of...
Hi AllGreat to find iWave's G1C SBC ranked in TOP10 by EE Times. iWave Systems’ iW-RainboW-G23S is the first SBC in 2018 that was loaded with Renesas’ RZ/G1C SoC, a chip designed around a one- or...
View ArticleRZ/A1L application with QSPI
Hi group, I'm running an RZ/A1L application out of QSPI (single chip, so only 4-bits.) Should I be compiling (and running) as an ARM or as a Thumb application? ARM instructions, being 32-bits wide,...
View ArticleClik here to view.
External Memory Stream IT
Hi,I am usinfg SDK for camera and I would like to save and show my buffer in External RAM (SDRAM).I defined my buffer like this : "static uint8_t video_buffer[(VIDEO_BUFFER_STRIDE *...
View ArticleRZ/A2M video input
Hello everybody,We have a project around RZ/A2M. Our sensor provides a RAW 14 bits digital video signal multiplexed on 7 pins. In the RZ/A2M processor's datasheet is said that video input module...
View ArticleXIP images and U-Boot verified boot
I have a Stream It board that's running an XIP image. I would like to modify the build to use U-Boot's verified boot feature. I'm not sure if it is possible to use an XIP image with verified boot...
View Article[Stream-it 2] How to control the USER button
Hi,I am using a Stream-it v2.30 board with RZ/A1LU. I also use the SDK (CMSIS-RTOS RTX :...
View ArticleRegarding ADC device file.
Hi,Could you please kindly share device file and driver details (or any pointers) of RZ-ADC device (P1_8 to Vunreg Monitoring). Though the datasheet points to GPIO (multiplexing all the analog...
View ArticleRZ/T1 Group Initial Settings for Microcomputers Incorporating the R-IN Engine...
Project LinkApplication note linke2 studio v7.2GCC Arm Embedded v6.3.1.20170620 I have simply imported the project and attempted to build. Other RZ/T1 sample projects have built without issue.When...
View ArticleR7S721000 video input
Hello,Can I process HD-SDI input video signal with R7S721000, or any other CPU from the family?Can I process directly analog video input - PAL/NTSC?Thank you
View Article