RZ/G2H: Boot From QSPI
Dear Sir/Madam,I was able to successfully boot HiHope RZ/G2H with the following configurations.1.) SD CARD Partition 1: Contains the Linux Kernel and Device Tree file Partition 2: Contains...
View ArticleRZ/N1D U-Boot: SRAM load address and reading cm3 image
Hello,I have a couple of questions I was hoping to get some help with...1. Why is the U-Boot SRAM load address at 0x200A0000 and not 0x20000000?2. When loading a cm3 image into the SRAM instruction RAM...
View ArticleConfiguration settings of High speed LAN at 1gbps
Hi All,We are using RZG1N Som with our carrier board with many peripherals integrated.We need to test the performance and throughput of gigabit ethernet port.1. What are the configuration settings for...
View ArticleHow to achieve 1gbps datarate for Gigabit Ethernet port?
Hi All,To test the throughput of gigabit ethernet port,1.we have established local network between our board (yocto os) and pc(windows)For 100Mbps full duplex configuration, we are getting datarate...
View ArticleRZ/G2M
Dear all,I am using RZ/G2M evaluation board, as i saw demo videos of face recognition in youtube , i am trying to download face recognition application for rz/g2m in renesas market place but i am not...
View ArticleClik here to view.
RZ/A1H RSK, Cannot erase and download on the flash
I am using RSK Board(RZ/A1H), and download my binary (bootloader and main) to the flash. My e2studio version is 7.8.0.And I cannot erase and download new binary, due to my binary.I have tried the...
View ArticleTrouble installing U-boot on RZ/N1S-DB
I am following the Quick Start guide for CONNECT-IT! ETHERNET RZ/N1S-DB and have reached the installation of...
View ArticleTrouble installing U-boot on RZ/N1S-DB
I am following the Quick Start guide for CONNECT-IT! ETHERNET RZ/N1S-DB and have reached the installation of...
View ArticleHaving issues with U-boot on RZ/N1S-DB
I am following the Quick Start guide for CONNECT-IT! ETHERNET RZ/N1S-DB and have reached the installation of...
View ArticleRZ/N1D: CM3 peripheral errors when CA7 working hard
Hi there,hoping for some help or insight into an issue we're having...RZ/N1D custom board (yocto poky 3.1.4 dunfell) based on the dev kit; A7 is running linux (4.9.0), M3 is running Goal (2.20.0) and...
View ArticleCAN0 in Renesas RZ/G1E
Dear all,i want to enable can0 in RZ/G1E in our custom board, i have enabled the following setting in my dts file, please find the below following&can0 { pinctrl-0 = <&can0_pins>;...
View ArticleRZ/G2L info
HiAs I'm new to Renesas and I really like what they announced for RZ/G2L would like to try and make prototype but lacking documentation, datasheets and reference designsHow I can get those and where to...
View ArticleRZ/A1H - Javafx
Dear all,I want to enable Javafx on RZ/A1H in buildroot environment, please let me know how to do it, please share me if any references documents regarding this.
View ArticleRZ/G2H: How to access QSPI from Linux?
Hi,I'm trying to access the QSPI flash from Linux but to no avail.I enabled the following configurations in the r8a774e1_hihope-rzg2h_defconfig file.(I thought this is enough. Unfortunately, this is...
View ArticleMCU Suffix question
Hi, I'd like to know about suffix difference for this part number, R7F7010473AFP very clearly. AA4BA4KA4 Please advise asap.
View ArticleDMA On-Chip Peripheral Module Request Mode
Hi,We need to perform a DMA transfer as response on MFTPU2 channel3 interrupt :TGI3A as mentioned in the HW_manual R01UH0403EJ0060.But what we get is that the dma is performed just once and we do...
View ArticleJOIN THE RENESAS 3D VIRTUAL EXPERIENCE AT EMBEDDED WORLD 2021
Virtual ExperienceJoin us during Embedded World 2021 and discover a whole day of on-demand Tech Talks in our fully updated immersive 3D platform featuring our latest products and solutions, where...
View Article[RZ/V2M]: Can I directly run TFlite model on DRP-AI accelarator?
Dear All,As the subject, can I run TFlite model on RZ/V2M directly?Or I need to do some conversion (or translation) for DRP-AI?If translation is needed, what AI models are supported by DRP-AI...
View ArticleClik here to view.
Blockchain Secured, Endpoint-to-Cloud IoT Management on Renesas RA and RZ
On-Demand WebinarLarge corporations have suffered damaging and expensive losses from cybersecurity attacks through IoT devices. There are many point-solutions for security, but system architects need a...
View ArticleHow to build uImage in RZ/G2H?
Hello,I am trying to build a uImage in RZ/G2H.I modified the KERNEL_IMAGETYPE from "Image" to "uImage" in 'hihope-rzg2h.conf' configuration file.meta-rzg2/conf/machine/hihope-rzg2h.conf -...
View Article