Dear All,
I am working on Streamit board to test camera capture and web video streaming.
As per below link board modifications done.
https://elinux.org/RZ-A/Boards/Stream-it
1. TRST issue, removed resistor R7 and Pull up TRST to VCC with 10K.
2. SDRAM Pin 21 to pin 36 modified.
3. changes done in u-boot to use 16 MB SDRAM.
4. Used BSP link provided in above link page to build and download.
git clone https://github.com/renesas-rz/rza_linux-4.9_bsp.git
5. Now i am in below state where booting the board and login to root is possible.
Welcome to Buildroot
buildroot login: root
buildroot login: root
how to integrate CEU sample code and build to make camera to work as webserver mode.
then i need to modify CEU engine to work as data capture mode.
Any support with application note and documentation will help a lot.
Thanks
Rashik