Maximum capacity SD card supported by RZ/N1D 400 pin processor
Hi,I have doubt on maximum capacity of SD card supported by RZ/N1D,400 pin processor.Please help me on this. Kind Regards,Faize
View ArticleRZ/T1: How to use the SWV interface?
I have the RSK+RZT1 Board and want to use the SWV interface in order to redirect the printf() function output to the SWV interface. How can I do this? This is my first expirience with ARM CPU and SWV...
View ArticleRZ/G1 Android BSP
Hi All,In the end of 2017 there was information that Renesas prepare Android BSP for RZ/G. Does anyone know readiness? Any possible to get it? BR, Sergey Lysov
View ArticleClik here to view.
eMMC boot partition can be used for boot up as it offers extra reliability -...
Hi,Can we use eMMC boot partition can be used for boot up as it offers extra reliability.Below screen shot is from e-MMC specs :-
View ArticleResistive Touch Support - RZ-A1L
Hi,Pls suggest the better & reliable way to implement resistive touch interface support on RZ-A1L.Thanks & Regards,Krishan Thakur
View ArticleHDMI issue
Hi,In RZ/G1M platform HDMI is working in all the monitors given below.Samsung (UA23F4003AR)Samsung (UA22ES5000)LG (40UF670T)LG (22LH454A-PT)Sony (KLV-22P402C)Philips (24PFL3951/V7)But I am finding an...
View ArticleLinux makefile autogeneration - RZ
Hi,Can anyone tell about the auto generation of make file?What is the tool available on RZ Linux platform to generate the makefile automatically.Thanks & Regards,Krishan Thakur
View Article24lc512 eeprom problems
Hi all, I'm trying to use the 24lc512 eeprom but I guess there are some problems with the linux driver.I'm using this code from Qt app (anyway also under linux I have problems): int...
View ArticleRZ/T1: Problem with Ethernet (ETHERC)
Hi, I have RZ/T1 CPU with Ethernet running on it. If I do a network burst the ETHERC stops receiving frames at some time, there is no data delivered to the application (ETHERC.BUFID.LONG returns buffer...
View ArticleClik here to view.
Why J-Link Lite can not use?
Just now , I got STREAM IT V2 kit. Error message is display like in the picture. I feel puzzled because I used the emulator in this kit. It should be no problem.Anyone can help me? Thank you very much.
View Articlecomputer vision support for RZ/G1H MPU platforms
I have a few questions regarding the RZ/G1H MPU such as on the iWave q7 SoM with RZ Linux: These questions are specific for the RZ/G1H MPU running RZ Linux 1.) Does the RZ/G1H support the Uncanny DLL...
View ArticleRZ/A1L CEU: CFSZR register usage
Hello,I'm currently using the CEU in data synchronous fetch on a RZ/A1L, I want to retrieve a monochrome image 400x400 from an omnivision sensor. I'm a bit puzzled by the CFSZR register usage.In my...
View ArticleStreamIt2_Tutorial.bin is 0kB , StreamIt2_Tutorial.hex has one line only(1kB)
I imported the sample project StreamIt2_Tutorial(an-r11an0083eg0100-rza1lu) and bulid it. A warning message display."c:/program files...
View ArticleNOR flash mount with XIP kernel build
Hi, I am writing an application which requires storing some dynamic data which needs to used on next reboot as wellWhen I am building an application with XIP kernel, I can't see NOR flash in /dev...
View ArticleWhich timer to use in linux kernel module
I am developing a linux kernel module for RZA1H that require 3 timers. Timer should provide precision of 100 micro second. I was looking at the available options. 1. high resolution timers provided by...
View ArticleUART available on RZA1H RSK
I am developing a RS485 UART driver for RZA1H RSK. For this UART signals are required to be coming out of RSK. Three signals are required UART RX, UART TX and one GPIO pin that can be used as TX...
View ArticleEtherCAT IP Core and PHY Synchronization in RZ/N1S
From the ESC (EtherCAT Slave Controller) IP core specifications, I understand that the PHY interfaced to EtherCAT ports should have same clock as that of ESC IP core. In order to meet this requirement,...
View ArticleNot able to flash QSPI Flash connected on a RZ/G1E with SEGGER J-Link...
Hi there, I am trying to flash a QSPI Flash connected on a RZ/G1E with SEGGER J-Link Plus (J-Flash 6.30).I have tried it with our custom design and the SK-RZG1E Dev-Kit without success.In J-Flash, I...
View ArticleHow to use SPIBSC1 for data starage by single MX25L1633 SPI flash on RZA1H
Hello, We are working on custom made RZA1H board with a dual QSPI S25FL512S on SPIBSC0, and we are using single MX15L1633 macronix on SPIBSC1.We want use SPIBSC1 as read/write file system to store...
View ArticleRZ/A1L Streamit board Ver 1.00
Dear All, I am working on Streamit board to test camera capture and web video streaming.As per below link board modifications done.https://elinux.org/RZ-A/Boards/Stream-it1. TRST issue, removed...
View Article