RS-485
Hi,I would like to use the RS-485 in my project.Is the direction of the bus is automatically controlled by the Tx-FIFO , or do I have to control it myself ?Thanks,Eli
View ArticleExternal Memory
Hi,I would like to use 2GByte DDR3 RAM for my project.Where Can I find any specification on the MAX memory size - Does the RZ/T2M support 2GByte address space ?The data sheet shows MAX clock of 100MHz...
View ArticleRZ/T2M Starter Kit.
Hi,I would like to use the RZ/T2M Starter Kit.I've noticed only one output for PWM - on the Micro BUS J22.Are there more PWM outputs ?Thanks,Eli
View ArticleCustom RZ/G2L Flash writer no response
Hi, I am able to boot to SCIF mode on my custom built board. I am able to upload the flashwriter.mot file when it asks to load program to System RAM. After I upload there is no response. The DDR...
View Articleerror in Building kernel image for RZn1 processor
Which Ubuntu version and Yocto branch is tested and verified for RZN1 processor, because for Rocko version I am getting glib,libgcc error while I select RZn1 as machine?Ubuntu - 18.04,Yocto branch...
View ArticleInterface the INMP441 Microphone Module I2S with RZV2M board
I need a SDK to interface the I2S supported microphone with my RZV2M board. I have interfaced the same module on RPI and I need to interface with RZV2M board with microphone now. Sugegst me some doc or...
View ArticleDefault login and password with EXTRA_IMAGE_FEATURES ?= "package-management"...
Hi All,I build an image of RZV2M using configuration EXTRA_IMAGE_FEATURES ?= "package-management" in the local.conf file. but unable to login as it's not working with login: root and password :(empty...
View ArticleDelta-Sigma digital filters
Hi,I would like to use the Delta-Sigma digital filters in my project.I see that it is mentioned in the RZ/T2M data sheet, but is it an internal hardware module or is it just an interface ?Thanks,Eli
View ArticleHow to configure opkg to insall any packages in RZV2M.
Hello all,I included the opkg in my build by editing local.conf files as shown in the attached image. I can see two files arch.conf and opkg.conf files included under /etc/opkg in my target rootfs.I...
View ArticleSDK rootfs question
Hello all,I have what is possibly a very simple question with regards to running AI applications on the RZV/2L evaluation board. I have been following the sample applications on the DRP-AI github...
View ArticleRZ/V2MA Sample application for Object Segmentation
Hi Team,I am working in RZ/V2MA board to build a ML/DL application with respect to Object Segmentation.I can't find any sample application regarding the object segmentation.Please provide any sample...
View ArticleKZS9131 Link up, no connection
Hello everyone,we are using the RZ/G2L for our product, however there is a problem with the Ethernet connection. As a phy we are using the Microchip KSZ9131.We have setup our device tree according to...
View Articlesmarc_rzg2l board Android 10 update
Hi, We are using renesas smarc_rzg2l based board and We are trying to make the android 10 update working.But we couldn't make it working properly.Steps we followed for testing update1. build the ota...
View ArticleVLP version for G2M
Dear,Do you have a recommended version of VLP for G2M?There are two things. The 4.19-CIP-RT, 4.19-CIP and 5.10-CIP.And could you let me know the performance difference between 4.19 and 5.10?Regards,
View ArticleAbout License inclusion in RZV2M.
Hi,I added gcc and g++ by modifying INCOMPATIBLE_LICENSE = "" , IMAGE_INSTALL_append= " gcc" and EXTRA_IMAGE_FEATURES ?= "tools-sdk package-management debug-tweaks" in local.conf file. gcc and g++ is...
View ArticleRZ/T2M Reliability Data
Hello,What is the Mean Time Between Failures (MTBF) for the RZ/T2M?Thank you.
View ArticleRZG2UL: Camera not able stream properly
Hi,We are testing OV5640 camera with RZG2UL based custom board and able to successfully integrate and stream to RGB display using below commands.media-ctl -d /dev/media0 -l "'rzg2l_csi2...
View ArticleLVDS Display in RZ/G2H Hi-hope Evaluation board.
Dear Renesas TeamWe are using Renesas RZ/G2H Hi-Hope evaluation board and we have interfaced LVDS display to it and connect to CN2404 sub board connector, according to the document default LVDS...
View ArticleRZ/A2M rspi communication clock is not coming.
I am utilizing the RZ/A2M for controlling a stepper motor. I have completed the pin configuration using the smart configurator. However, I am currently facing an issue with the clock signal in channel...
View ArticleRZG2M Weston Window Freezes after 2 hrs even with the graphics lib of...
Hi We are using As per renesas info page, if we use RZ MPU multimedia package evaluation version then weston wayland conpositer will stop after 2 hrs. Hence, we requested Renesas to provide...
View Article