DDR4 stress testing
Hello,We have designed custom board with RZ/G2UL CPU and we do have DDR4.We have to perform DDR4 stress test to validate DDR4 performance at its full speed which is connected with RZ/G2UL CPU .Can you...
View ArticleClik here to view.
EMMC booting error in RZ/V2M EVK.
Hi team,I am working with the RZ/V2M EVK. when i am trying to emmc booting causing an error.Kindly find the attached image.Please guide me how to over come the issue or error.Thanks,Aravind S.
View ArticleClik here to view.
Wakeup for Secondary CPU ..Bad Linux ARM64 Image magic! in RZ/V2M
Hi All,I finished the build after including all BSP, ISP, and DRP-AI packages. Trying to boot from the SD card right now. The error "Wakeup for Secondary CPU Bad Linux ARM64 Image magic!" appears in...
View ArticleRZ MPU LINUX
Hello. I plan to use RZ MPUs. I just browsed the site. It is possible to install linux on RZ MPUs. Which MPUs can it be installed on? Also, I didn't see the SDK on the site. Is there a startup document...
View ArticleClik here to view.
RZ/V2M DRP-AI "Missing or unbuildable dependency chain was: ['libmetal']"...
Hi,I am building DRP-AI package with all the required dependencies installed according to "Startup Guide", but when I am executing "bitbake core-image-bsp" , exits with an...
View ArticleRZ/V2L Yocto Build issue
Hi Renesas Team,RZ/V2L BSP building offline as instructed in documents.We are facing issues of building RZ/V2L BSP the error log is given belowrz@rz:~/rzv/build$ cp...
View ArticleClik here to view.
EMMC binary file uploading error & the RZ/V2M kit is COMM port connection error.
Hi Sir,I am working with a RZ/V2M EVK kit, & Facing couple of issues, Kindly find below & help us to find a solution for mentioned issues.1. As per the document we have followed all the set but...
View ArticleClik here to view.
RZ/Five docker issue
Dear Renesas Team,I have built RZ/Five BSP 3.0.3 and have enabled docker, but facing this issue, please find the attached below image.
View ArticleRZ/V2L ADC Interface
Hello all,I had asked a question before about RZ/V2L Evaluation Kit ADC Pin Layout and after researching into embedded linux and understanding the build process and yocto, I managed to get a better...
View ArticleClik here to view.
[ERROR] Err code 0x30 : V4L2 : Failed to Open. in RZ/V2M
Hi,I am trying to run the sample application "Darknet Tiny YOLOv2 MIPI-HDMI version", but getting an error "[ERROR] Err code 0x30 : V4L2 : Failed to Open".Please suggest, if something...
View ArticleClik here to view.
TX_CLK stuck at 2.5MHz
Hi,I'm in a situation where my `RGMII TX_CLK` is seemingly stuck at 2.5MHz even when the PHY negotiates with a 100baseT or 1000baseT line and the link comes up. How is that even possible and what could...
View ArticleRZ/G2UL Evaluation Board Kit Audio Issues
Hello!I'm currently experimenting with the Evaluation Board RZ/G2UL and have encountered some issues with the audio functionality.Here's my setup: I've connected a headset to the "Microphone in" and...
View ArticleClik here to view.
RZ/T2M with FreeRTOS
Hi,I'm Eli and I'm using the RZ/T2M MCU with e2-studioI've noticed that the entry point to my code is in hal_entry.cso I've added #inlude "FreeRTOS.h" and "task.h" ,there,then tried to add...
View ArticleRunning Darknet Tiny YOLOv2 MIPI-HDMI version Sample application but no...
Hi All,I am running "Darknet Tiny YOLOv2 MIPI-HDMI version" sample application. I think the application started running but nothing getting on HDMI Screen means a blank screen(no output), as can be...
View ArticleFreeRTOS+FAT support for the RZ/T2M family
Hi,Is there a FreeRTOS+FAT support for the RZ/T2M familyI searched on e2-studio Midleware->Storage-> but it's not thereThanksEli
View ArticleSoftware fix for color inversion
Hello,I am encountering an issue with my Renesas MCU-based tool that displays Bluetooth data on an LCD screen. Due to a mistake in my hardware design, I have inverted the red and blue lines in my...
View ArticleRZA3UL: Programming IPL and FSP to QSPI without JTAG
We are using RZA3UL based custom board and testing blinky sample application from FSP.As per the documentation IPL binary and FSP application has to be programmed to QSPI using JTAG.Is there any way to...
View ArticleGstreamer issue in RZ/G2L
Dear Renesas Team,We are using Renesas RZ/G2L smarc-evaluation board and the bsp/vlp version is 3.0.1, in which we have enabled all the dependency of g-streamer and trying to stream an IP-camera, while...
View ArticleClik here to view.
RGB signals are not generating...
Hi Renesas Team,We are using rzg2ul type 1 cpu and we have connected rgb to lvds bridge chip (SN65LVDS93A). We have connected single channel 18 bit LVDS display (AMA-070A04-DU2511-G010) in output of...
View Article