Quantcast
Channel: Forum - Recent Threads
Browsing all 1583 articles
Browse latest View live

USB Camera on RZG2L EVK

Dear All,I tried to use USB Camera on RZG2L EVK + BSP V1.3 with the below gst cmd.gst-launch-1.0 v4l2src device=/dev/video0 ! videoconvert ! waylandsinkIt displayed the USB camera image on HDMI screen...

View Article


I need to make an application in portrait on rz\a1h with freeRTOS

How can I rotate the display 90 degrees on a rz\ah1 ? I've read that VDC5 doesn't allow you to do this on graphic layers.Is there a library/application note that describes how to render a portrait...

View Article


Configuring SDRAM in FreeRTOS on RZA2M

I am doing some Graphics Testing and find that I am running out of On-Chip RAM (1280 x 768  RGB565).   This size is consuming about 3.9MB.I spent time looking for how to conifgure SDRAM in FreeRTOS and...

View Article

ROS on RZG2L

Dear All,I tried to run ROS1 Melodic on RZG2L EVK.However I met the below problem on running RVIZ.***************root@smarc-rzg2l:/usr/share/rviz# rosrun rviz rviz[ INFO] [1600599454.105187014]: rviz...

View Article

Image may be NSFW.
Clik here to view.

rotate PAL camera 90 degrees with vdc5

How to rotate a PAL camera by 90° with vdc5 ? I have inverted the height with the width, but I can't get a widht higher than 560 /2 (input PAL format). Is there an example? If VDC5 captures the image...

View Article


RZG2L doesn't support position-x and position-y properties of waylandsink

Dear All,In RZG2 platform, it supports position-x/y properties of waylandsink.However RZG2L BSP doesn't support it. How can I add it?Best regards,Edward

View Article

How to increase RZG2L multimedia memory size?

Dear All,I tried to decode multiple H.264 contents at the same time and then I got the below error messages.********************[ 225.746882] rgnmm_drv mmngr: swiotlb: coherent allocation failed,...

View Article

Is there any command to read the unique id of the chip, we need the unique id...

Dear All:    I want to get the unique id like serial number of RZ/G1C to identify different device, is there any command can help to get it?Joyce

View Article


RZG2L H.264 DEC (VCPL4)

Dear All,I tried to decode multiple H.264 videos (FullHD) simultaneously.My testing environment & result are as below*****************************HW: RZG2L EVK (WS2 w/discrete power)SW: RZG2L BSP...

View Article


How to read the endpoint 0 at a certain time in RZ/A2M

Hi,I am implementing UVC protocol in RZ/A2M for our project, for that, I need to read the endpoint 0 at a certain time to get the messages replied to by the host. But I am not clear about the APIs used...

View Article

RZ/A2M blinky sample free rtos code compilation error

Hi,I am using RZ/A2M evaluation board and e² studio Version: 2021-10 (21.10.0). I tried to compile blinky sample free rtos code. But I am getting the following errorsmake: ***...

View Article

RZ/T1 development board MAC address

Hello, I want to ask a simple question, is the MAC address of the RZ/T1 development board inherent or is it burned in by the routine software? If it is burned in by the routine software, is there any...

View Article

How to create a new free rtos project in RZ/A2M evaluation board and e²...

Hi,I am using  RZ/A2M evaluation board and e² studio Version: 2021-10 (21.10.0).I want to create a new free rtos project. But when creating new project the option " FreeRtos(with IOT libraries ) "...

View Article


Segger J link while debugging RZ/A2M board

The following error is showing while debugging RZ/A2M boardError in final launch sequence:  GDB server failed to startWhat will be reasonRegardsPMR

View Article

Image may be NSFW.
Clik here to view.

JTAG Debugger is not enabled

Hi,I am using e2 studio Version: 2021-10 (21.10.0) Build Id: R20210916-1304 and RZ/A2M evaluation board . The JTAG I am using is Segger J Link which I got along with the evaluation board.My problem is...

View Article


Image may be NSFW.
Clik here to view.

Unable to load .elf file to RZ/A2M target board

HiI am using RZ/A2M evaluation board . The IDE used is E2 Studio. I am trying ti load .elf file using Segger J link which I got along with the evaluation board.But the file is not loading to the target...

View Article

Regarding RZ/N1D 5-port switch, Is there any Application notes or Reference...

I am developing a driver for RZ/N1D 5-port switch for a custom RTOS. I face an issue of losing response packets for ping command. Few times, ping commands gets response, but few times not getting...

View Article


RZG2LC USB2.0 Host Controller

Dear All,I would like to know the max endpoints of USB2.0 Host Controller in RZG2H/M/N/E and RZG2L/LC/UL.For USB3.0 Host Controller, I can find the below information in RZG2H/M/N/E...

View Article

RZ Product Survey

Hello everyoneWe are currently planning to develop a better user experience for all RZ product users.Therefore, in order to further improve your experience, we would like to hear your requests and...

View Article

Looking for a RZ/T1 R7S910025 sample to control the PHY through the EtherCAT...

Hello, the same HEX file, R7S910025 cannot control phy through EtherCAT control mdio management interface, there is no waveform output, phy working mode cannot be configured normally, R7S910018 is OK,...

View Article
Browsing all 1583 articles
Browse latest View live