Quantcast
Channel: Forum - Recent Threads
Browsing all 1583 articles
Browse latest View live

how to translant code from STM32 to Rz/A2M?

Hi,everyone!I got my first taste of this product this week, and I don't know anything about it.I used to use STM32 all the time, so I'm so confused.As a result, wanna ask if there is a simple way for...

View Article


Trouble with UART1 RX FIFO on RZ/N1S

I am having trouble getting UART1 to work on an RZ/N1S.  The pinmux is setup for UART0_I on both GPIO82 and GPIO102 with GPIO82 being my TX GPIO102 being my RX line.  I am able to send messages out of...

View Article


get_ticks() is not returning incremented value

Hello,I'm trying to use get_ticks() to limit the time allocated in boot prompt. I expect get_ticks() to return incremented number of ticks every time I call it. I notice that get_ticks() is always...

View Article

Boot mode in GR-Lychee (RZ/A1LU) board

Dear everybody In RZ/A1LU operate in boot mode 1 ( boot from the serial flash memory ). in the first, affter power on. The boot start up on-chip ROM. then user program will execute in the serial flash...

View Article

Analog camera in RZ/A1H

Dear all,i'am using RZ/A1H custom made board with linux environment(kernel 4.14 xip) and external RAM of 64MB, i want to connect two analog cameras in RZ/A1H, but i don't know the steps to enabling it,...

View Article


RZ/N1s Dev Board not detected (Start up). Fresh Board not connecting with DFU.

Hi,I got RZ/N1S development board for my proof of concept. Just I followed the start up guide r01qs0021ed0060-rzn1s-connectit.pdf to start with the board.It got detected 4 PORT as mentioned but the USB...

View Article

[sk-rzg1m] How to detect an USB mass storage from u-boot on USB0 (port CN22,...

Hello!Board used : SK-RZG1M (https://elinux.org/RZ-G/Boards/SK-RZG1M)u-boot used : https://elinux.org/File:G1M_U-boot.srec.zipHow to detect, from u-boot, an USB mass storage, connected on USB0...

View Article

Bare-metal image on A7 core

Hi, I try to load the sample from SolKit.V1.4.3\Software\BaremetalDrivers to QSPI FLASH.I built a RAW binary for A7 core and try to upload it to QSPI by U-boot, according the document.USB DFU A7 set...

View Article


Serial Sound Interface Module on RZ/A2M

We are using RZ/A2M (the CPU is R7S921053 and the sub-board is RTK79210XXB00000BE). We want to use the serial sound interface module, which is based on chip WM8978. However, we don't find and example...

View Article


Image may be NSFW.
Clik here to view.

FlashTools in Guiliani does not work

I am using a .bat file called "FlashGuilianiDemo.bat" in "FlashTools" Folder in "Guiliani_SDK_2.3.0_Renesas_RZA2M_FreeRTOS10_DAVE"It is used to Downloads 3 bin files into an evaluation boardBut I can...

View Article

Image may be NSFW.
Clik here to view.

How to use the export files of GSE

I am using GSE to design GUI program, but I am still confused about how to use the export files of GSE after reading most of the documents in "Guiliani_SDK_2.3.0_Renesas_RZA2M_FreeRTOS10_DAVE".In the...

View Article

Software requirement to drive LVDS to HDMI port

Dear All, We are working with the RZG1N SOM with our carrier board that contains lvds to hdmi port. When the hdmi monitor is connected to the port, the display is not proper. It contains different...

View Article

RZT1 CiA402 demo project an-r01an3071jj0110-rzt1-ethercat link error

Hi,I get the EtherCAT slave controller application code with the help of SSC tool following r01an2824ej0100.pdfwhen I compile an-r01an3071jj0110-rzt1-ethercat M3 project with IAR for ARM V8.22.2Here...

View Article


Biplane_EtherCAT_V1.21_multi_20181211 project ESI file error

Biplane_EtherCAT_V1.21_multi_20181211 is a sample project in YDRIVE-IT-RZT1_V2.3 CD img.I genenrate CiA402 code based on "Renesas_RZT1_DRIVE_IT!_CiA402.xml" with SSC tool V5.12.Error is occur.There are...

View Article

RZ A2M evb linux DRP example: how to display output video on PC monitor via...

Hello,I have RZ A2M evb with mipi camera and display output board with HDMI connector. I downloaded linux 4.19 bsp and file system on qspi and it works fine(Linux boots up perfectly). I wanted to see...

View Article


RZ/G2M Modify existing BSP or Device Tree

Dear Sir/Madam,We have chosen RZG2M processor for our panel PC application and from support of our local distributor I have received Hihope RZG2M development board.Also we are totally new to Linux...

View Article

Load user code during runtime .

Dear Sir/Madam,I am using Hihope RZG2M eval. board. After developing the application 'C' Code on Ubuntu host, I have to remove the SD card from the Board and copy the code from my host and insert the...

View Article


Warning[Lt009]: Inconsistent wchar_t size in...

I bulid the M3 project of Biplane_EtherCAT_V1.21_multi_20181211 with IAR for ARM V8.32.3.Here are warning messages:Warning[Lt009]: Inconsistent wchar_t size hwos_init_legacy.o(libos.a) and 8 other...

View Article

How can I generate the Ethercat slave code base on ESI file with SSC tool?

Hi everyone,If you are not interested in in Ethercat appliction, please leave.I tested the CiA402 demo project, which is Biplane_EtherCAT_V1.21_multi_20181211.Unfortunately, there are many faults in...

View Article

Renesas RZ/G1E serial no

Dear all, I need to have different Unique serial number in different Renesas RZ/G1E board, now in all the RZ/G1E board i am having serial number shown as 0 only, how to update serial number in RZ/G1E...

View Article
Browsing all 1583 articles
Browse latest View live