RZ/T2M - Failure to read HDFAR
Hello,I am replicating the trap&emulate strategy in a Hypervisor using a RZ/T2M development board. The process involves the Hypervisor receiving an exception (load/store access fault) when a VM...
View ArticleMicro-SD Card not detecting
Hi All, We are working rzg2n based customized board,we got uboot working. Our hard ware voltage for SDIO interface is 1.8V fixed. when we try to detect micro-sd cardit is showing below error.U-Boot...
View ArticleHow to get RZN2L RSK_OpENer sample src/renesas other module?
How to get RZN2L RSK_OpENer sample src/renesas other module?1、RSK_OpENer use 2 driver:Ethernet,uart。so,RSK_OpENer Renesas module,It's just these two things that are related。example:um_serial_io_uart.c...
View ArticleRZ/T2M: Adding ADC compare match window
Hello,I want to add a compare match window interrupt for specific ADC channels. 1. Is this possible for RZ? I certainly see the registers present for this.2. In the FSP configuration, I'm able to add...
View ArticleRZ/N1D: PRP
I'm using the PRP demo application note provided on the YCONNECT-IT-RZN_V1.4.4 kit.As per the demo notes, RedBox functionality is enabled using 3 Ethernet ports on the RZ/N1D device. I would like to...
View ArticleGR-PEACH Board debugging with NXP DAPLink CMSIS-DAP Usb Interface
Hello,I need to debug an application on GR-PEACH board using the USB interface using the OpenOCD Debugger.I have configured the the debugger in my project in this way:But when I start the debugging the...
View ArticleRZ/G2L boot-up image
Dear Renesas Team,We are using RZ/G2L Evalation board, we need to insert boot-up logo images in u-boot as well in kernel, can you please let us know how to do the sameThanks & Regards Mahesh R
View ArticleRZ/N1D: UART1 direction control
In RZ/N1D when UART1 (40060000) is configured under Linux (4.19) to use the auto-direction control (iUART_DE) then the RTS pin doesn't toggle as expected, whereas the same thing works with other UARTs....
View ArticleMenu Positioning not working in RZG2L
Hi,We are using weston (8.0.0) on RZG2LWe are facing some issues with the menu positioning (context menu/ drop downs):The context menu which pop up upon right button press is usually positioned...
View Articlenew pcba RZN2L cant connect jlink
new pcba,new n2l ,Blank flash。RAM execution without flash memory ,xSPl0 boot mode (x1 boot serial flash),Cannot enter debug
View ArticleRenesas rzg2lc kernel panic in base image when 'init 0' and 'shutdown now'...
I am using Renesas rzg2lc EVK. I have built base VLP3.0.0 image and another base image VLP3.0.1 image referenced from renesas official document. As soon as I entered 'init 0' and 'shutdown now'...
View ArticleRZ/T2M Boot from flash and starting CPU1
Hello,I want to boot CPU0 and CPU1 from xSPI0 external flash.I can boot CPU0 but how can i start app for CPU1.Is there any way to start CPU1 after CPU0.Do i have to start CPU1 from loader?And last how...
View ArticleRZFive Ethernet issue
Dear Renesas Team,We are using Renesas RZ/Five Evaluation board and we need to use Ethernet0 or Ethernet1 connection in the board, but for us both the ethernets are not working.We have also enabled...
View ArticleRZ/T2M Linker Script
Hello,What is the definition of these linker sections?And how should i edit the linker script for loader and app?
View ArticleWhere is executed the code on RZ/A1H-Starter-Kit-Plus and GR-PEACH.
Hello,I'm trying the code present in the examples r01an5093ej0110-rza1-swpkg for rsk demoboard and r01an5397ej0110-rza1-swpkg-grpeach for GR_PEACH. Loading the executable with J-Link Lite I see that...
View ArticleR8A774A2 RZG2M chip - Uboot boot failing (Chip id - R8A774A3)
Hi Support Team,We were using hihope board for development in which we used Yocto Rocko version and kernel version 4.19, VLP package 1.0.12 based on hihope having chip ID "R8A774A1".We received RZG2M...
View ArticleThumb state to ARM sate
Hello,When starting debug in all Rensas demos, I need to write 0 to the T bit of the CPSR register via the debug interface.How do I switch the RZ/T2M processor from Thumb mode to arm mode software?
View ArticleRZT2M dual motor mtu3 phase count & AB+Z
Hi!I'm trying to unravel the pins required for a dual motor board, with each motor having its own AB + Z phase counters on mtu3.I see that MTIOC1A can be used for the Z in for motor...
View ArticleRGA DrawImageChild does not take the in_SourceMinX and in_SourceMinY into...
Hi,I'm developing a display with a Renesas RZ/A2M and I'm trying to draw some texts with the RGA library.For now, I have a solution where I have one PNG image per character and I display the...
View ArticleRZ/V2MA Not loading boot loaders
Hi i am building some ML/DL application on V2MA board, where during yocto build of Linux package provided in official page is used v1.1.0, Base BSP built without any errors,(Warning were there)once we...
View Article