Quantcast
Channel: Forum - Recent Threads
Browsing all 1583 articles
Browse latest View live

Adding Driver code for M33 in Rzv2L

Hi I am using RZ/V2L Evaluation kit (Smarc ). I want to develop the firmware code for Sensor (https://github.com/melexis/mlx90632-library). using E2 studio.I have created the Project in E2 studio added...

View Article


RZ/N2L safety manual

Hi,Can I get the safety manual for RZ/N2L?

View Article


Renesas RZ/G2LC board boot up using JTAG

I am using Renesas's RZ/G2LC evk. For that I want to use JTAG to flash/load boot loader(bl2_bp-smarc-rzg2lc.srec and fip-smarc-rzg2lc.srec) on the board and boot-up the board using JTAG. Please provide...

View Article

Image may be NSFW.
Clik here to view.

n2l ospi address offset error

I compared the waveforms of ospi and qspi and found that the address in qspi is as expected, but the address offset in ospi does not match the expectation. Specifically, the address sent by the host...

View Article

RZ/G2N Firmware over the air support.

Hi Renesas Team,I am planning to make a custom board using the processor RZ/G2N. There is a query from the client side that is it possible to update the Linux Kernel and the application separately?...

View Article


Image may be NSFW.
Clik here to view.

Not able to boot from eMMC (RZ/G2M board)

Dear Renesas Team,We are using Hi-hope RZ/G2M evaluation board, we need to boot from eMMC.For same, we have found this information and source in git hub repository -...

View Article

RZ/G2N docker certificate issue

Dear Renesas Team,I have enabled Docker feature in RZ/G2N, but facing some issue, please find the below error message.Run 'docker COMMAND --help' for more information on a command.root@hihope-rzg2n:~#...

View Article

RZ/A2M SPI "Write Buffer Operation"

I am working on RZ/A2M RTK7921053C00000BE board and have developed the code to write to SPI flash memory (Macronix MX25L51245G) that is mounted on the board. However to reduce write time and to get...

View Article


Image may be NSFW.
Clik here to view.

G2UL - Not able to get 208 MHz in SDR104 Mode

Hello,We are working on Smarc G2UL Type 1 EVK from Renesas and we have seen that we are not able to get exactly 208MHz of clock in SDR104 mode of the SD port but instead of that, we get 133 MHz clock...

View Article


Image may be NSFW.
Clik here to view.

G2UL - Not able to get 200 MHz in HS200 mode

Hello,We are working on Smarc G2UL Type 1 EVK from Renesas and we have seen that we are not able to get exactly 200MHz of clock in HS200 mode for the eMMC port but instead of that, we get 133 MHz clock...

View Article

flashing uboot from linux itself

How can I flash uboot from within linux? As of now I found these below mentioned method, sudo dd if=u-boot.bin of=/dev/sda bs=512 seek=2or sudo dd if=u-boot.bin of=/dev/sdb bs=512 seek=2am I doing it...

View Article

RZ/V2L board not booting properly

We are facing the same booting issue as given below in 02 nos RZ/V2L EVK  as one client board with us and second with client .The booting out of issue is as given below in blue color...

View Article

Hi-hope rz/g2m X11 and wayland simultaneously not working

I am working with hi-hope rz/g2m evk kit. Where I have added  RTK0EF0045Z0023AZJ-v1.0.2_EN.zip(unrestricted MMP) in my Yocto image. I want to add somewhat packages which are related to X11 (i.e xterm...

View Article


RZ/N1D RTC VDD Issue

In our design, we are using a coin-cell battery to connect to RZ/N1D's RTC_VDD33 pin to provide backup power to the RTC domain when the board is powered off. There is no other connection in between....

View Article

RZ/G2L memory controller configuration

Hi,I need to configure memory controller on RZ/G2L for 2T mode to add one cycle before ADR/CMD signals to give large setup window. Any idea how to do that?Any info appreciated.Thank you!

View Article


e2studio project version control

Hello community, I recently started working with e2studio for the Rz family. I created a basic project to use the evaluation board. Now, I want to share the project with the rest of my team, that means...

View Article

EMMC Crash Scenario

Hi Renesas Team,I am very new to microprocessors and Linux environment. SO if there is any mistakes in my questions please forgive. I am currently using RZG2N based EVK from SM Electronics. They are...

View Article


custom RZG2UL board: USB not working

Hi Renesas Team,We have designed our custom board based on RZG2UL CPU and we are not getting response from USB0 and USB1.we have 512MB RAMFor USB0 we are using dedicated pins AD6 & AE6For USB1 we...

View Article

Image may be NSFW.
Clik here to view.

G2UL - Need electrical and timing details for MIPI CSI-2 signals

Hello,As we are doing signal integrity testing on our custom board and we need these details of electrical and timing acceptable limits of MIPI CSI-2 signals because in the HW user manual, we are not...

View Article

Image may be NSFW.
Clik here to view.

weston application with G2N evkit

Dear,I'm facing trouble when I test the sample application of Weston as follows.The fps is too low. Could you help me to make the fps as high?<Test environments>  RZG2N hihope EVKit  Screen :...

View Article
Browsing all 1583 articles
Browse latest View live